Canon CANOSCAN 9000F - Manual (Page 17)

Scanning Film
15
6
Click Scan.
7
When the preview is displayed, place a check
mark beside the number(s) of the frame(s) you
want to scan, and then click Scan to start
scanning.
8
When prompted that the scanning completed,
click Exit.
9
Click Save to save the images and close MP
Navigator EX.
Do not move the scanner while it is
operating.
Do not move the scanner while it is
operating.
• Do not leave the film strip in the Film Guide for an extended period of time as heat from the
unit may damage the film.
• For more information on scanning film, see “Scanning Film” in "On-Screen Manual".
• When you finished scanning films, put the protective sheet back on the document cover. Insert the
tab on the bottom of the protective sheet into the document cover, and push the top of the protective
sheet to fit in until it clicks.