Audio connector board, Removing the audio connector board – Dell Vostro 1500 (Mid 2007) User Manual
Page 3
1.
Connect the sniffer cable to the wireless sniffer board.
2.
Align the screw hole in the wireless sniffer board with the screw hole in the base of the computer, and then lower the board into place.
3.
Replace the M2 x 3-mm screw and secure the wireless sniffer board to the base of the computer.
4.
Replace the palm rest (see
Replacing the Palm Rest
).
5.
Replace the internal card with Bluetooth wireless technology, if installed (see
Replacing the Bluetooth Card
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the hinge cover (see
Replacing the Hinge Cover
).
9.
Replace the hard drive (see
Replacing the Hard Drive
).
10.
Replace the optical drive (see
Replacing the Optical Drive
).
Audio Connector Board
Removing the Audio Connector Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the optical drive (see
Removing the Optical Drive
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the internal card with Bluetooth wireless technology, if installed (see
Removing the Bluetooth Card
).
8.
Remove the palm rest (see
Removing the Palm Rest
).
9.
Remove the M2.5 x 5-mm screw that secures the audio connector board to the base of the computer.
10.
Lift the audio connector board out of the computer.
11.
Disconnect the audio cable from the audio connector board.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
Do not disconnect the audio cable from the system board.