Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 37)

Appendix D. Additional functions 35
3 Configure an IP filter.
•
IP Filtering Enable: You can enable or disable IP filtering.
• IP Address 1 ~ IP Address 10: You can enter filtered IP addresses.
Users having the IP addresses set here are able to access the network
print server.
• IPv6 Filtering Enable: You can enable or disable IPv6 filtering.
4 Click Submit.
Only system administrators or authorized users can set, via EWS, IP
addresses that can access the device. Up to 10 addresses or ranges of address
choices can be made and set. Authorized users are able to change the action
(Apply/ Undo) and to print to the network print server..
NOTE: Ranges of addresses shouldn't contain “null” or “0.0.0.0” values.
Restart
1 Run your web browser and access Embedded Web Service.
2 Click Printer Server Settings Other Features Restart Machine.
You can reboot the network print server, if your network settings are not
applied correctly or the network card is disconnected from your network.
Ethernet speed
You can set the communication speed for Ethernet connections.
1 Run your web browser and access Embedded Web Service.
2 Click Printer Settings Print Settings Network Menu.
•
Speed: Automatic, 10 Mbps(Half Duplex), 10 Mbps(Full Duplex),
100 Mbps(Half Duplex),100 Mbps(Full Duplex). select a Ethernet
speed from the drop-down list.
• 1000 Mbps(Full Duplex) for Dell 5330dn Mono Laser Printer only.
3 Click Submit.