Dell PowerEdge VRTX - Manual (Page 425)

425
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGQoS.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
When the QoS mode is changed, the following occurs:
• When changing from Advanced mode to any other mode, policy profile
definitions and class maps are deleted. ACLs, which are bonded directly to
interfaces, remain bonded.
• When changing from Basic mode to Advanced mode, the QoS Trust mode
configuration in Basic mode is not retained.
• When disabling QoS, the shaper and queue setting (WRR/SP bandwidth
settings) are reset to default values.
All other user configurations remain intact.
General
This section contains the following topics:
• QoS Mode
• QoS Properties
• Queue
• Mapping to Queue
• Bandwidth
• TCP Congestion Avoidance
QoS Mode
To enable/disable the QoS mode:
1 Click Quality of Service > General > QoS Mode in the tree view to
display the QoS Mode page.
2 Select the QoS Mode. The possible options are:
– Basic — QoS is enabled in Basic mode on the switch
– Advanced — QoS is enabled in Advanced mode on the switch.
– Disable — QoS is not enabled on the switch.