Christie Digital Systems LW40 - Manual (Page 2)

Copyright 2003 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. MIL5740 Due to constant research, specifications and
features are subject to change without notice
.
Sept 03-NA
Brightness
•
4,000 ANSI lumens (typical, dual lamp mode)
• 2,400 ANSI lumens (typical, single lamp mode)
• 90% brightness uniformity
Contrast Ratio
•
Up to 900:1 on/off
Resolution
•
3 x 1.2" LCD TFT p-Si Active Matrix light
engine with Micro Lens Array
• True WXGA (1366 x 768) resolution
• 8-bit digital color processing offering
16.7 million displayable colors
• 10-bit linear gamma processing
Dynamic Scaling
•
Digital scaling of VGA – SXGA resolutions
• Digital de-interlacing technology of STV,
DTV, and HDTV formats with automatic
3:2 pull-down
Horizontal Frequency
•
15 to 120kHz
• Automatic frequency control
Vertical Frequency
•
50 to 120Hz
• Automatic frequency control
Dot Clock
•
200MHz
Optional Projection Lenses
•
A full suite of short/medium/long-fixed
and zoom optional lenses
• Power lens shift U/D ratio of 10.0 to 0.10
• Horizontal image offset: on-axis or 12º
Modular Inputs
•
HDI5 (Analog RGB, audio input (2 x RCA,
R,L/mono)
• Control port (9-pin DB9)
• Two optional interface slots
Outputs
•
Two built-in speakers 3W per channel
• Stereo audio loop through RCA x2
Source Compatibility
•
Compatible with VGA, SVGA, WXGA,
SWXGA, UWXGA, Mac, SUN and SGI
sources
• Auto-detects PAL, PAL M, PAL N, NTSC,
NTSC4.43m and SECAM video standards
• Accepts and displays all currently known
DTV/HDTV formats; 480i, 480p, 720p,
1080i, 1035i via RGB or Y, Pb, Pr
connection
• HDTV compatible with automatic 3:2
pull-down
• 800 TV lines horizontal resolution
• Digital Visual Interface (DVI-D), SDI, and
HD-SDI compatible with optional modules
Enhanced Feature Set
•
3D digital noise reduction
• User-selectable 2 or 1 lamp mode
• Motorized zoom and focus
• Motorized lens shift (up and down)
• Digital zoom function (max. x49)
• Digital keystone function (vertical +/- 40º,
horizontal +/- 10º)
• Power management function
• Audio mute
Control/Networking
•
Automatic Multi-Scanning Set-up system
(AMSS) (phase/tracking/position)
• Progressive scan video decoding
• USB Type B mouse control
• Remote control jack
• RS232-C control port and loop through
via 9-pin D-sub terminal (in/out)
• Wired remote control
• IR remote keypad with mouse and laser
pointer
• Front and rear IR receivers
• Remote mouse control
• ChristieNET™ control and monitoring via
HTML and SNMP (optional)
Graphical User Interface
•
Easy set-up and intuitive multi-language
onscreen displays (OSD) (English/
German/French/Spanish/Italian/
Portuguese/Dutch/Swedish/Chinese/
Korean/Japanese)
• Direct-key status function
• Image aspect ratios: 16:9 (native) and 4:3
• Picture reverse scans function (left/right,
top/bottom) for front, rear and inverted
projection
Lamp Specification
•
Dual-lamp 265W UHP lamps with
optional 1-lamp operation
• 1,000 hours (typical) lamp life at
maximum brightness
• Lamp life warning indicators
• User replaceable lamps
Power Requirements
• Universal power AC 100 – 240V, 50/60Hz
• Operating voltage: 90-264 V (100-120
V/200-240V +/- 10%)
• Power consumption: 720W maximum
• Thermal dissipation: 2,700 BTU/hr
• Operating temperature: 5º to 35º C
(storage: -10º to 60º C)
• Operating humidity: 20 – 80%
(storage: 0 – 90%)
• Acoustic noise level: <65dB (fans set for
maximum lamp life)
Weight and Size
•
45.2 lbs (20.5 kg)
• 17.3" W x 8.9" H x 23.8" L
• 439mm W x 230mm H x 605mm L
Standard Accessories
•
User manual
• 1 meter VGA – HD15 M/F cable
• AC line cord x 2 (UL and European)
Optional Accessories
•
ChristieNET™
• 1.2:1, 1.8:1 and 10.3:1 fixed lenses
• 2.0-2.65:1, 2.95-3.85:1, 3.85-5.2:1,
5.2-6.8:1, 6.8-8.8:1 zoom lenses
• DVI-D module
• 5 BNC module
• Y/C interface module, S-video
• HD-SDI module
• SDI module
• 10-Bit Faroudja ® video processing module
• Ceiling/floor/wall mounts
• Shipping case
• 265W UHP lamp module
Regulatory Approval
•
Complies with all relevant worldwide
EMC & Safety standards
• The product complies with FCC class B,
CE mark and safety requirements
IEC950 (EN60950), UL1950/cUL
Warranty
•
Product warranty, 2 years parts and
labor (excluding lamp)
• Lamp warranty 120 days or 500 hrs,
(whichever comes first)
Reliability
•
Mean time between failure (MTBF) over
28,000 hrs
LW40
•
38-VIV210-01
For Cinema Advertising, Lobby Displays, Alternative Content
F E AT U R E S
WWW.CHRISTIEDIGITAL.COM
Corporate Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (866) 880-4462 (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA-Shanghai
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]
CHINA-Beijing
PH: +86 10 6561 0240
FX: +86 10 6561 0546
[email protected]
Designed under ISO 9001
• ChristieNET TM attaches the LW40
to any network for monitoring and
control of vital projector functions.
• With 44% more pixels than an XGA projector
displaying 16:9 content, the LW40 provides
higher pixel density and a smoother image. • Native WXGA resolution provides
459,264 more pixels than standard 4:3
aspect ratio displaying 16:9 content.