Crestron electronic AV2 - Manual (Page 25)

Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System
“Front Panel Password” Window
NOTE: “Front Panel Password” window from Crestron Toolbox version 1.02.29 or
later.
5. To change the current password, use the drop down lists to select the four
numbers for the new password, then click the Change button.
NOTE: New password must be four numbers (each in the range of 1-6).
The default Date/Time Menu, shown after this paragraph, permits alterations to the
current system date and time shown on the top line. Select either Date or Time to
open the respective submenu.
Default Date/Time Menu
The Date Set submenu, shown after this paragraph, permits alterations to the current
system date shown on the top line. Use the Dn (down) and Up selection buttons for
month, day and year decremental or incremental changes, respectively.
Date Set Submenu
The Time Set submenu, shown after this paragraph, permits alterations to the current
system time, shown on the top line. Use the Dn (down) and Up selection buttons for
hour and minute (Min) decremental or incremental changes, respectively. The
AM/PM selection button toggles between AM and PM.
Operations Guide – DOC. 5957B 2-Series Integrated Dual Bus Control System: AV2 & PRO2 • 21