Dell 7330dn Mono Laser Printer - Manual (Page 68)

Loading Paper
Dell 7330 Mono Laser Printer
4-9
Loading Paper
This topic includes:
■ Loading Paper in Tray 1 (MPT) for Single-Sided Printing on page 4-9
■ Loading Paper in Trays 2-5 for Single-Sided Printing on page 4-13
■ Loading Paper in Tray 6 for Single-Sided Printing on page 4-17
■ Loading Paper in Tray 1 (MPT) for 2-Sided Printing on page 4-20
■ Loading Paper in Trays 2-5 for 2-Sided Printing on page 4-24
■ Loading Paper in Tray 6 for 2-Sided Printing on page 4-27
Follow these general steps to print:
1. Load paper in the tray.
2. Adjust the tray guides.
3. If prompted by the control panel, confirm the paper type and size and change it as
required.
4. Send the job to the printer from the application’s Print dialog box.
Loading Paper in Tray 1 (MPT) for Single-Sided Printing
All paper sizes and types can be used in Tray 1 (MPT).
Caution: If you change the type or size of
paper in a tray, you must change the paper
type and size on the control panel to match
the paper that you loaded. If you fail to do
this, print-quality problems or jams can
occur, and the fuser can be damaged.
7330-123