Dell 1720/dn Mono Laser Printer - Manual (Page 12)

Understanding the Operator Panel
The operator panel has six lights and two buttons.
Press the Continue button to resume printing.
Press the Continue button twice quickly to display an error code.
Press the Cancel button to cancel the job currently printing.
Press and hold the Cancel button until all of the lights come on to reset the printer.
Printing the Printer Settings Configuration Sheet
To help resolve printing problems or to change printer configuration settings, advanced users can print the Printer
Settings Configuration sheet for instructions on advancing through the configuration menus to select and save new
settings.
1. Turn off the printer.
2. Open the front cover.
3. Press and hold the Continue button as you turn on the printer.
All the lights cycle.
11 Network port
(1720dn only)
Slot into which you plug the Ethernet cable (sold separately). The other end of the Ethernet
cable plugs into the network port.
12 On/Off switch Switch you use to turn the printer on or off.
13 Power cord
connector
Connects the printer to the power outlet using the supplied country-specific power cord.
14 Rear exit Door you open to allow print jobs to exit the printer flat, such as those printed on
transparencies or cardstock.