Dell C3760dn Color Laser Printer User Manual

Page 201

Advertising
background image

Understanding the Printer Menus

199

WPS Setup

NOTE:

WPS Setup is available only when the printer is connected using the wireless network.

Purpose:
To configure the wireless network using WPS.
Values:

Reset Wireless

NOTE:

Reset Wireless feature is available only when the printer is connected using the wireless network.

Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network

settings are reset to their default values.

TCP/IP

Purpose:
To configure TCP/IP settings.
Values:

Push Button Control

Cancel

*

Cancels the wireless setting with the encryption type of WPS-PBC.

Start

Configures the wireless setting with the encryption type of WPS-PBC.

PIN Code

Start Configuration

Configures the wireless setting using the PIN code assigned automatically

by the printer.

Print PIN Code

Prints the PIN code. Confirm it when entering PIN assigned to the printer

into your computer.

IP Mode

Dual Stack

*

Uses both IPv4 and IPv6 to set the IP address.

IPv4 Mode

Uses IPv4 to set the IP address.

IPv6 Mode

Uses IPv6 to set the IP address.

IPv4

Get IP Address

AutoIP

*

Sets the IP address automatically. A random value in the range of

169.254.1.0 to 169.254.254.255 that is not currently in use on the

network is set as the IP address. The subnet mask is set as

255.255.0.0.

BOOTP

Sets the IP address using BOOTP.

RARP

Sets the IP address using RARP.

DHCP

Sets the IP address using DHCP.

Panel

Use this option when you want to set the IP address manually on

the operator panel.

IP Address

When an IP address is being set manually, the IP is allocated to the

printer using the format nnn.nnn.nnn.nnn. Each octet that makes

up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and

any value in the range of 224 to 254 cannot be specified for the

first octet of a gateway address.

Subnet Mask

When an IP address is being set manually, the subnet mask is

specified using the format nnn.nnn.nnn.nnn. Each octet that

makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255.

255.255.255.255 cannot be specified as the subnet mask.

Advertising