I/o panel: dell optiplex gx260 service manual, I/o panel, Removing the i/o panel – Dell OptiPlex GX260 User Manual
Page 66
Advertising
I/O Panel
Dell™ OptiPlex™ GX260 Service Manual
Removing the I/O Panel
Small Form-Factor Computer
1. To access the screw that holds the I/O panel to the computer, remove the hard drive.
I/O Panel Removal—Small Form-Factor Computer
1 internal speaker cable
2 chassis intrusion switch cable
3 control-panel cable
4 front audio cable
5 mounting screw
6 I/O cable
2. Disconnect the control-panel cable from the control-panel connector on the I/O panel. Disconnect the I/O cable from
the I/O panel.
3. Remove all cables that are connected to the I/O panel, such as the chassis intrusion switch and internal speaker cables.
Advertising