Dell C1765NFW MFP Laser Printer User Manual
Page 40
38
Connecting Your Printer
WPS-PBC (Wi-Fi | WPS Button)
You can start WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) by pressing the
(Wi-Fi | WPS)
button.
NOTE:
WPS-PBC is available only when the wireless LAN access point (Registrar) or router supports WPS-PBC.
NOTE:
Before starting WPS-PBC with the
(Wi-Fi | WPS) button, confirm the position of the WPS button (button name may
vary) on the wireless LAN access point (Registrar) or router. For information about WPS operation on the wireless LAN access
point (Registrar) or router, refer to the manual supplied with the product.
NOTE:
For more information on the
(Wi-Fi | WPS) button, see
"Status of Wi-Fi | WPS Button Backlight (Dell C1765nfw Color
Multifunction Printer only)" on page 93.
If a problem occurs or error messages are displayed on the operator panel, see "Wireless Problems (Dell C1765nfw Color
Multifunction Printer only)" on page 364.
1 Press and hold the
(Wi-Fi | WPS) button on the printer for 2 seconds.
Ensure that the
(Wi-Fi | WPS) button starts to flash and Press WPS Button on WPS Router
appears on the operator panel.
2 Start the WPS operation on the wireless LAN access point (Registrar) or router within two minutes.
3 When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.