Replacing the i/o panel, Procedure, Postrequisites – Dell XPS One 2710 (Mid 2012) User Manual
Page 93
Replacing the I/O Panel |
93
41
Replacing the I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Align the slots on the I/O panel with the ports on the I/O assembly.
2
Press down on the I/O panel till it snaps into place.
Postrequisites
1
Replace the trim cover. See "Replacing the Trim Cover" on page 89.
2
Replace the stand. See "Replacing the Stand" on page 49.
3
Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 93 Friday, April 27, 2012 3:23 PM