Dell OptiPlex GX1 - Manual (Page 60)

Working Inside Your Computer: Dell OptiPlex GX1 and GX1p Midsize Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SIG/computer.htm[2/21/2013 12:07:23 PM]
450MHZ* Reserved (do not change).
500MHZ* Reserved (do not change).
* The correct microprocessor speed is automatically detected and set by the system. Do not change the
settings of these jumpers.
The system can operate with a microprocessor speed up to 600 MHz.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your online
System User's Guide.
jumpered unjumpered
System Board and Riser Board Labels
Table 2 lists the labels for connectors and sockets on your system board and riser board, and it gives a brief
description of their functions.
Table 2. System Board and Riser Board Connectors and Sockets
Connector or
Socket Description
AMC ATI multimedia channel
BATTERY Battery socket
CD_IN CD-ROM audio interface connector
DIMM_x DIMM socket
DSKT Diskette/tape drive interface connector
ENET NIC connector (optional)
FAN Microprocessor fan connector
HDLED Hard-disk drive LED connector (on riser board)
IDEn EIDE interface connector
INTRUSION Chassis intrusion switch connector
ISAn* ISA expansion-card connector (on riser board)
KYBD Keyboard connector
LINE-IN Audio line-in jack
LINE-OUT Audio line-out jack (amplified source)
MIC Microphone jack
MONITOR Video connector
MOUSE Mouse connector