Primary and secondary virtual disk pairs, Raid levels for replication, Repository virtual disks – Dell POWERVAULT MD3600F User Manual

Page 187

Advertising
background image

Configuration: Premium Feature— Remote Replication

187

Other information about replication repository virtual disks include:

• Specifying that replication repository virtual disks be created from

unconfigured free capacity on the disk group, or creating a new disk group

and its member replication repository virtual disks from unconfigured free

capacity on the storage array.

NOTE:

The disk group containing replication repository virtual disks cannot

be deleted without disabling the Remote Replication premium feature.

• Default names of the replication repository virtual disks are Replication

Repository 1 and Replication Repository 2. These names cannot be changed.

• The activation process creates replication repository virtual disk with

identical capacity. In a dual RAID controller module storage array, the

default capacity for each replication repository virtual disks is 128 MB per

controller (requiring a total of 256 MB in the RAID group). This default

capacity cannot be modified.

RAID Levels for Replication Repository Virtual Disks

If replication repository virtual disks are created from unconfigured free capacity

on the storage array, you can select a RAID level for the disk group of either RAID

1/10, RAID 5, or RAID 6. However, if the replication repository virtual disks are

created from an existing disk group, RAID levels are not user configurable.

Primary and Secondary Virtual Disk Pairs

After the Remote Replication feature is activated and configuration of the FC

fabric, individual virtual disk replication pairs are be created. Up to 16

replication virtual disk pairs can be established. Each pair consists of a

primary (online) virtual disk and a secondary (offline) virtual disk, both of

identical capacity. During operation, primary and secondary roles can be

interchanged to test the replicated data sets without breaking the

relationship. Independent copies may be created by deleting the relationship,

in which case both virtual disks are available online to their configured hosts.

book.book Page 187 Tuesday, June 18, 2013 3:03 PM

Advertising
This manual is related to the following products: