Memory card troubleshooting, Memory card troubleshooting checklist, Nothing happens when a memory card is inserted – Dell V515w All In One Wireless Inkjet Printer User Manual

Page 118

Advertising
background image

Error Message:

What it indicates:

Possible solutions:

No Answer

Auto Answer may have been turned
off on the receiving fax machine.

Verify the number, and then resend
the fax.

Set the printer to redial.

Note: Depending on your country
or region, there may be a limit on
the number of redial attempts,
regardless of the redial settings
that you set in your printer.

Schedule to resend the fax at a later
time.

No Caller ID

Call Stopped

Your printer stopped the call because
the incoming fax has no sender
information. You may have chosen to
block faxes with no Caller ID or faxes
without Caller IDs are not allowed in
your country or region.

Disable Block No-ID.

To troubleshoot error messages in the fax software, click Help to view the help information for the fax software.

Memory card troubleshooting

“Memory card troubleshooting checklist” on page 118

“Nothing happens when a memory card is inserted” on page 118

“Cannot print documents from a memory card or flash drive” on page 119

“Photos do not transfer from a memory card across a wireless network” on page 119

Memory card troubleshooting checklist

Before you troubleshoot, use the following checklist to solve most memory card problems:

Make sure that the memory card you are using can be used in the printer.

Make sure you insert the memory card into the correct slot.

Make sure the memory card is not damaged.

Make sure memory card contains supported file types.

Nothing happens when a memory card is inserted

If the "Memory card troubleshooting checklist" does not solve the problem, then try one or more of the following:

R

EINSERT

THE

MEMORY

CARD

The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.

C

HECK

THE

USB

CONNECTION

1

Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2

Firmly plug the square end of the USB cable into the back of the printer.

Troubleshooting

118

Advertising