CITIZEN PD-24 - Manual (Page 25)

25
2
Loading the Paper
The following types of paper can be printed by this printer.
• Thermal roll paper
• Thermal cut sheet paper (Copy thermal roll paper cannot be used.)
• Thermal copy cut sheet paper
Recommended Papers
Cut sheet paper (Thermal paper, copy thermal paper)
Min. sheet length: 120 mm (4.72 in.)
Max. length: 250 mm (9.84 in.)
Recommended designated papers
Thermal paper: Nippon Seishi Co., Ltd. TF50-KS-E2D
Copy thermal paper: Naigai Carbon Ink Co., Ltd. TLC#25 black (designated
paper)
Roll paper
Max. external diameter: 50 mm (1.97 in.)
Internal diameter (Diameter at start of winding):
8 mm
∼ 8.5 mm (0.32 in. ∼ 0.33 in.)
* Neither glued nor folded at its inner end.
Recommended designated paper: Nippon Seishi Co., Ltd. TF50-KS-E2D
• The thickness of paper that can be used by auto sheet load ranges from
60 to 65 µm.
• If the paper thickness is 80 µm or more, it may be impossible to ensure
printing quality.
• If any paper other than the recommended designated paper is used, it may
be impossible to ensure adequate printing quality, so do not use such
paper.
• The density of the printing varies according to the type of printing paper
used. It is possible to change the printing density and the printing paper in
menu setting mode. (see page 35)
• It is possible to change the printing density and the printing paper with a
printer command. For details see Command Reference (attached
document).