Clarion VS715 - Manual (Page 19)

VS715 STAND ALONE DIGITAL MEDIA PLAYER
18
Stopping CD Playback
1. Press the STOP button on the IR Remote Control.
NOTE: When the STOP is pressed the CD will start playback
from the beginning when PLAY is pressed again.
Pausing CD Playback
1. Press the PLAY/PAUSE button on the IR Remote Control.
Press the PLAY/PAUSE button again to resume normal
CD playback.
Fast Forward/Fast Backwards
1. Press the RAPID PREVIEW or RAPID REVIEW button
during normal audio playback at 2X normal speed. Press
either button multiple times to choose 4X or 8X normal
speed.
• The sound is partially muted during Rapid Preview or
Rapid Review.
2. Press PLAY to cancel Rapid Preview or Rapid Review
and resume normal audio playback.
Track Ahead/Track Back
This function is used to locate the beginning of a track or the
start of the next track.
1. Press the CHAPTER/TRACK AHEAD button during
playback to advance to the start of the next track.
NOTE: Press the Chapter/Track Ahead button multiple times to
advance multiple tracks ahead.
2. Press the CHAPTER/TRACK BACK button during play-
back to find the starting of the current track.
NOTE: When the Chapter/Track Back button is held for more
than one second, the previous track is selected.
• The sound is muted during Track Ahead or Track Back.
• While in Chapter Track or Track Back the Display Status
screen is activated along the top of the screen. When the
track is found, the display disappears and normal playback
resumes.
Repeat One or Repeat All (Chapters)
The RPT button is used to choose a single track to repeat over
and over, or if all tracks are repeated after played back.
1. Press the RPT button during playback to activate the
Repeat function. “REPEAT [OFF]” is shown in the the
upper left corner of the screen. Press the RPT button
again to repeat the current track playing.
VS715OMRev0.qxd 1/25/01 4:19 PM Page 18