Removing the coin-cell battery, Installing the coin-cell battery, Removing the power-switch cable – Dell OptiPlex 3010 (Mid 2012) User Manual
Page 21
Advertising
Removing The Coin-Cell Battery
1.
Before Working Inside Your Computer
2.
Remove the
.
3.
Press the coin-cell battery inward to allow the battery to pop up from the socket.
4.
Lift the coin-cell battery out of the computer.
Related Links
Installing the Coin-Cell Battery
Installing The Coin-Cell Battery
1.
Place the coin-cell battery into its slot on the system board.
2.
Press the coin-cell battery downwards until it is secured.
3.
.
4.
After Working Inside Your Computer
.
Related Links
Removing The Coin-Cell Battery
Removing The Power-Switch Cable
1.
Before Working Inside Your Computer
2.
Remove the
.
3.
Remove the
.
4.
Disconnect the power-switch cable from the system board.
21
Advertising