Chromalox PM400-2 - Manual

Chromalox ®
DIVISION 4 SECTION HB
SALES
REFERENCE
DATE
SERVICE REFERENCE Installation Instructions
PM400-2
161-049691-001
MARCH, 1999
(Supersedes PM400-1)
© 2010 Chromalox, Inc.
GENERAL
WARNING: This heater is not intended for use in
hazardous atmospheres where flammable vapors,
gases, liquids, or other combustible atmospheres
are present as defined in the National Electrical
Code. Failure to comply can result in explosion or
fire.
1. Heater Construction Characteristics —
A. One-piece stainless steel clamping band.
B. Two (2) rust-resisting chrome steel sheath strip heater ele-
ments.
C. Heavy construction of clamp and quick-connect allen head
bolt allow firm grip on heaters and tight heater fit to pipe
or barrel configuration.
2. WARNING: Hazard of heater failure. Pipe or barrel
surface temperature not to exceed 800˚F.
3. Heater bands may be used individually or in multiples spaced
1/4” apart.
4. WARNING: Users should install adequate controls
and safety devices with their electric heating
equipment. Where consequences of failure may be
severe, back-up controls are essential. Although
the safety of the installation is the responsibility of
the user, Chromalox will be glad to make equip-
ment recommendations.
Type HB Heater Bands
for Barrel or Surface Temperatures up to 800˚F
Model PCN Volts Watts W/In 2 Amperes
Barrel Diameter Wt
(In.) (Lbs.)
HB-5075 273631 240 750 50 3.1 5 1.5
HB-5080 273287 240 800 48 3.3 5-1/4 1.75
HB-5460 272760 240 600 33 2.5 5-1/2 1.75
HB-5415 273463 240 1500 82 6.3 5-1/2 1.75
HB-6040 269149 240 400 20 1.7 6 2
HB-6075 268998 240 750 38 3.1 6 2
HB-6410 269464 240 1000 48 4.2 6-1/2 2
HB-7010 273623 240 1000 43 4.2 7 2
HB-7715 273586 240 1500 53 6.3 7-1/8 2.25
HB-7412 273578 240 1250 48 5.2 7-1/2 2.25
HB-7490 269157 240 900 35 3.8 7-1/2 2.25
HB-8013 269000 240 900 30 3.8 8 2
HB-8014 273599 240 1400 50 5.8 8 2.25
HB-8415 269886 240 1565 53 6.5 8-1/2 2.3
HB-9015 269018 240 1100 33 4.6 9 2.5
HB-9217 272073 240 1710 53 7.1 9-1/4 2.5
HB-9413 269165 240 1300 35 5.4 9-1/2 2.75
HB-9416 273640 240 1600 45 6.7 9-1/2 2.75
HB-1018 269878 240 1800 48 7.5 10 3
HB-10226 273615 240 2600 68 10.8 10-1/4 3
HB-10415 269026 240 1200 30 5.0 10-1/2 3
HB-1120 272305 240 2025 48 8.4 11 3.25
HB-11412 260034 240 1200 28 5.0 11-1/2 3.25
HB-11417 273711 240 1700 38 7.1 11-1/2 3.25
HB-12416 269042 240 1500 30 6.3 12-1/2 3.5
HB-13418 269050 240 1800 38 7.5 13-1/2 3.75
HB-1412 269130 240 1200 23 5.0 14 3.9
HB-1425 269069 240 2500 45 10.4 14 3.9
HB-15425 269077 240 2500 40 10.4 15-1/2 4
HB-1725 263986 240 2500 38 10.4 17 4.2
HB-17425 263994 240 2500 38 10.4 17-1/2 4.3
HB-2030 264006 240 2500 38 12.5 20 4.5
Specifications — Table A
1/4” spacing between
multiples.
1-1/2” W
Type HB