Editing a user-defined role, Figure 39 – Dell POWEREDGE M1000E User Manual
Page 200
172
Web Tools Administrator’s Guide
53-1002756-01
User-defined roles
15
FIGURE 39
Switch Admin:Add User Defined Role dialog
5. Enter a role name in the Name field.
6. Enter a description of the role in the Description field.
7. To grant the role a read/write privilege, select the privilege and click the right-arrow next to the
Read & Write Privileges section.
You can select multiple privileges.
8. To grant the role a read privilege, select the privilege and click the right-arrow next to the Read
Privileges section.
You can select multiple privileges.
9. To delete a privilege, select it and click left-arrow.
10. Click OK to save your changes.
Editing a user-defined role
To edit a user-defined role, perform the following steps.
1. Open the Switch Administration window as described in
“Opening the Switch Administration
2. Select the User tab.
3. Select the Role sub-tab.
4. Select an existing user-defined role.
5. Click the Edit button.