Dell 924 All-in-One Photo Printer - Manual (Page 46)

Right-click Dell Photo AIO Printer 924, and select Set as Default. 2.
Correct communication problems between the Dell All-in-One Center and the
computer.
Remove the USB cable from your printer and your computer. Reconnect the USB cable to
your printer and your computer.
Turn off the printer. Unplug the printer power cable from the electrical outlet. Reconnect
the printer power cable to the electrical outlet, and turn on the printer.
Restart your computer.
Printer Problems
Ensure the printer power cable is firmly connected to the printer and the electrical
outlet.
Determine if the printer has been held or paused.
In Windows XP, click Start Control Panel Printers and Other
Hardware Printers and Faxes.
1.
In Windows 2000, click Start Settings Printers.
Double-click Dell Photo AIO Printer 924, and then click Printer. 2.
Make sure a check mark is not next to Pause Printing. If a check mark is next to Pause
Printing, click Pause Printing to clear it. 3.
Check for flashing lights on the printer.
For more information, see Error Messages and Lights .
Ensure you installed the ink cartridges correctly and removed the sticker and tape
from each cartridge.
Make sure you loaded the paper correctly.
For more information, see Loading Paper .
Ensure a PictBridge-enabled camera is not connected to the printer.
For more information, see Printing Photos From a PictBridge-Compatible Camera .
Ensure the printer displays the correct language.
For more information, see Resetting the Language on Your Printer .
If you are using a wireless printer adapter, ensure you have the latest firmware
updates.
For the latest updates and information, visit www.support.dell.com.
General Problems
Faxing Problems