Media and tray, Envelope – Dell B1163/W Multifunction Mono Laser Printer User Manual
Page 30
Media and tray
30
2. Basic Setup
To see for paper weights for each sheet, refer to "Print media specifications" on
(●: Supported, Blank: Not supported)
Envelope
Printing successfully on envelopes depends upon the quality of the envelopes.
To print an envelope, place it as shown in the following figure.
•
When selecting envelopes, consider the following factors:
-
Weight: should not exceed 90 g/m
2
otherwise; jams may occur.
-
Construction: should lie flat with less than 6 mm curl and should not
contain air.
-
Condition: should not be wrinkled, nicked, nor damaged.
-
Temperature: should resist the heat and pressure of the machine
during operation.
•
Use only well-constructed envelopes with sharp and well-creased folds.
•
Do not use stamped envelopes.
•
Do not use envelopes with clasps, snaps, windows, coated lining, self-
adhesive seals, or other synthetic materials.
Types
Tray
a
a. The available paper types for manual feeding in the tray.
Plain
●
Thick
●
Thin
●
Bond
●
Color
●
CardStock
●
Labels
●
Envelope
●
Preprinted
●
Cotton
●
Recycled
●
Archive
●