Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 18)

1 8 S e t u p f o r n e t w o r k p r i n t i n g
w
w
w
.
d
e
ll.
co
m/
su
p
p
l
i
e
s |
su
p
p
o
r
t
.
d
e
l
l.c
o
m 5 Select whether or not to use this printer as the default printer.
6 Click Next.
7 You are prompted to insert the Drivers and Utilities CD. Click OK.
A dialog box asks for the file “lexdrvin.exe”.
8 Browse to the appropriate folder on the Drivers and Utilities CD (for example,
D:\Drivers\Win_9x\English).
9 Click OK.
10 Click OK again.
All the necessary files are installed on your computer.
11 Go to "Set up the queue on the print server" on page 18.
Installing drivers in a Linux environment
Your printer supports Red Hat Linux versions 7.2, 7.3, and 8.0, and SuSE Linux 7.2, 7.3, and
8.0. Refer to the Unix®/packages on the Drivers and Utilities CD for instructions on
installing your printer in a Linux environment.
Installing drivers in a Novell environment
Your printer supports Novell® NetWare® versions 3.x, 4.x, 5.x, and 6.x. For information on
using your printer in a Novell environment, refer to your Novell documentation.
Set up the queue on the print server
1 Click Install the printer on the Network (Network Installation) and then click Next.
2 Click On a print server, and then click Next.
3 Select both options to install the software and the User’s Guide on the print server, and
then click Next.
4 The box to share the printer is checked. Create a share name you want to use for the
PCL driver and/or the PostScript driver. Make it an obvious name for clients to easily
find when they are browsing for a shared printer.
NOTE: You do not need to create share names for both drivers if you are only using one driver.
5 Click Next.
6 Select TCP/IP, and then click Next.
If your network also uses NetWare, click NetWare Systems as well.