Cypress EZ-OTG CY7C67200 User Manual
Page 78
CY7C67200
Document #: 38-08014 Rev. *G
Page 78 of 78
Document History Page
Document Title: CY7C67200 EZ-OTG™ Programmable USB On-The-Go Host/Peripheral Controller
Document Number: 38-08014
REV.
ECN NO.
Issue
Date
Orig. of
Change
Description of Change
**
111872
03/22/02
MUL
New Data Sheet
*A
116988
08/23/02
MUL
Preliminary Data Sheet
*B
124954
04/10/03
MUL
Added Memory Map Section and Ordering Information Section
Moved Functional Register Map Tables into Register section
General Clean-up
Changed from “Preliminary“ to “Preliminary Confidential“
*C
126211
05/23/03
MUL
Added Interface Description Section and Power Savings and Reset Section
Added Char Data
General Clean-up
Removed DRAM, MDMA, and EPP
Added “Programmable” to the title page
*D
127334
05/29/03
KKV
Corrected font to enable correct symbol display
*E
129394
10/07/03
MUL
Final Data Sheet
Changed Memory Map Section
Added USB OTG Logo
General Clean-up
*F
472875
See ECN
ARI
Removed “power consumption” bullet from the Features bullet list.
Corrected number GPIO[31:20] to read GPIO[31:30] in
Made sentence into a Note in
Section “Host Port Interface (HPI)”
.
Corrected the Host/Device 1 Interrupt Enable (Bit 8) Information in
“Interrupt Enable Register [0xC00E] [R/W]”
Corrected data on Write Protect Enable (Bit 15)
to read “the GPIO Mode Select [15:8] bits are read
only until a chip reset“.
Re-wrote the Register Description in
Section “SIEXmsg Register [W]”
.
Put document on 2-column template and corrected grammar. Put the figure
captions at the top of the figures per new template specifications.
Added Static Discharge Voltage information in
Added compliance statement and TID in
.
*G
567317
See ECN
KKVTMP
Added the lead free information on the Ordering Information Section. Imple-
mented the new template with no numbers on the headings.