Assembly – Craftsman HIGHSPEED SWEEPER 486.24229 User Manual
Page 5
5
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
AsseMBLY
TOOLs reQUired FOr AsseMBLY
(2)
7/16" Wrenches
(2)
1/2" Wrench
(1)
Pliers
(1)
Hammer
sTep 1:
(see FigUre 1)
Install a 5/16-18 x 2-3/4" hex bolt (17) and a 5/16"
•
jam nut (25) in each bag arm channel.
sTep 2:
(see FigUre 2)
Slide the bag arm channels (4) into the sweeper
•
housing as shown in figure 2. Secure them to the
sweeper housing with a 5/16-18 x 2-1/2" hex bolt (15)
and 5/16" nylock nut (21). Tighten bolt until snug.
do
not overtighten.
sTep 3:
(see FigUre 3)
Secure each bag arm channel to the side of the
•
sweeper housing with a plastic wing nut (31) installed
onto the bolt assembled in step 1.
Insert a pivot rod retainer (30) down into the end of
•
each bag arm channel.
Install a compression spring (32) into the bottom of
•
each of the pivot rod retainers to secure them to the
bag arm channels.
FigUre 4
8
15
14
21
8
sTep 4:
(see FigUre 4)
Attach the drawbar (14) to the sweeper by fastening
•
a drawbar bracket (8) above and below the drawbar
using three 5/16" x 2-1/2" hex bolts (15) and 5/16"
nylock nuts (21).
FigUre 1
17
4
25
FigUre 2
15
4
21
FigUre 3
31
30
32