Clarion Navigation In-Car Entertainment - Manual (Page 72)

Chapter 4: Customizing 72
The unit displays.
Units menu
4. Press the desired distance unit. The main
navigation screen appears.
The new units setting appears next time you
navigate.
5. When you’re finished, press the exit button (F1).
Defining position using lists
If your starting point is in a high-rise complex or
large manufacturing plant where the N.I.C.E.
mounted in your vehicle does not have direct access
to the satellite signal, follow this or the procedure in
the next topic to establish your point of origin
(HOME).
1. Press the navigation button (F3),
2. Press Setup.
3. Scroll down and press Set Vehicle Position.
4. Use the menus to define the point of origin in
the same way you defined a destination. See
“Define your destination” on page 35.
Defining position by pointing
Rather than use the lists as in the previous topic to
define your origin, you can use the map itself.
1. Touch the address on the map,