Dell P1500 Personal Mono Laser Printer - Manual (Page 72)

Press and hold Cancel until all of the lights cycle to return to the Home menu.
Turn off the printer to exit the menus.
Utilities menu
Use the Utilities menu to troubleshoot printer problems.
Reset Factory Defaults
Use this setting to: return your printer settings to the factory default values. Sometimes resetting the
printer to the original settings solves formatting problems. All menu items are reset to the factory default
values except:
Display Language.
All settings in the Parallel menu and USB menu.
All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are deleted. Resources
in flash memory are unaffected.
Hex Trace
Use this setting to: help isolate printing problems when unexpected characters print or characters are
missing. Hex Trace helps you determine if there is a problem with the language interpreter or the cable by
telling you what information your printer is receiving. To exit Hex Trace, turn off the printer.
Print Quality Test Pages
Use this setting to: help isolate print quality problems, such as streaking. When you select this setting,
three pages print to help you evaluate print quality:
A text page with printer information, cartridge information, current margin settings, and a graphic.
Two pages with graphics.
Setup menu
Use the Setup menu to configure how the printer formats the end of a line depending on the computer
system being used.
Auto CR after LF