Dell PowerEdge 2800 User Manual
Page 72
Advertising
¡
Connect SCSI channel B on the riser card (see
Figure A
-4
) to connector SCSIB on the SCSI backplane (see
Figure A
-5
). This channel controls
drives 4 through 7.
l
To use an optional RAID controller card in a split 2x4 backplane configuration:
¡
Connect SCSI channel A (channel 0) on the controller card to connector SCSIA on the SCSI backplane (see
Figure A
-5
). This channel controls the
boot drive (drive 0) and drives 1, 2, and 3.
¡
Connect SCSI channel B (channel 1) on the controller card to connector SCSIB on the SCSI backplane (see
Figure A
-5
). This channel controls
drives 4, 5, 7, and 9.
Back to Contents Page
Advertising