Removing and installing parts – Dell Dimension 4700 User Manual
Page 10
Back to Contents Page
Removing and Installing Parts
Dell Dimension 4700 Series Service Manual
Memory
You can increase your computer memory by installing memory modules on the system board.
Your Dell Dimension computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see "
Memory
."
DDR2 Memory Overview
DDR2 memory modules should be installed in pairs of matched memory size, speed, and technology. If the DDR2 memory modules are not installed in matched
pairs, the computer will continue to operate, but with a slight reduction in performance. See the label on the upper-right corner of the module to determine the
module's capacity.
The recommended memory configurations are:
¡
A memory module installed in connector DIMM connector 1
or
¡
A pair of matched memory modules installed in DIMM connectors 1 and 2
or
¡
A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in DIMM connectors 3 and 4
l
If you install mixed pairs of DDR2 400- and 533-MHz the modules function at the slowest speed installed.
l
Be sure to install a single memory module in DIMM connector 1, the connector closest to the processor, before you install modules in the other
connectors.
NOTE:
Always install DDR2 memory modules in the order indicated on the system board.
NOTICE:
Do not install ECC memory modules.