Char-Broil 463821908 - Manual (Page 14)

14 • 463821908
3
4
A Place bottom of front panel into three slots in the bottom shelf.
B Attach front panel to legs with four #10-24x2" machine screws and #10-24 flange nuts.
A Place valve/hose/regulator onto control panel. Attach with machine screws. NOTE: Make sure the two valve
stems are centered in their clearance holes; otherwise, this can cause main burner level problems.
B Insert ignitor body into ignitor hole on control panel, then tighten it with sheetmetal nut. NOTE: if your grill come with
Snap-in ignitor, please see
Option.
#10-24 x ½”
#10-24 Flange Nut
Qty.4
#10-24 X 2”
Machine Screw
Qty.4
Back of Cart
#10-24 x ½”
Machine Screw
Qty.2
Valve/Hose/Regulator
Ignitor
Snap-in
Ignitor
Valve/Hose/Regulator
Option:
Snap the
ignitor into the control
panel.
Sheetmetal Nut