Compaq 1800 Series - Manual (Page 42)

Mobile Internet PC Features 3-17
Manually Ejecting a Diskette
If you need to eject a diskette when the power is off, complete the following steps
to manually eject the diskette:
1. Make sure the power is off and any external power sources are disconnected.
2. Insert a metal rod, such as a paper clip (approximately 1/16 inch in diameter
and at least 3/8 inch in length) into the Manual Eject hole and push firmly as
shown in the figure below. The diskette should pop out of the SuperDisk drive.
Manually Ejecting a Diskette
3. Remove the diskette from the drive.
If the diskette does not eject, contact your local Compaq-authorized dealer,
reseller, or service provider.