Cecilware CT-500 - Manual (Page 7)

6
When cleaning, switch power off and disconnect from the outlet. If the power cord is damaged, it must be
replaced by a Cecilware Recommended Qualified Service Technician in order to avoid a hazard.
Allow the Conveyor Toaster to cool down after use before dismantling for cleaning; the unit will still be too
hot to handle immediately after use.
Trouble Shooting
If your Cecilware Conveyor Toaster does not operate, please check the following before placing a service
call.
Conveyor Toaster CT-250, CT-500, CT-750
Problem Cause Remedy
The unit does not work; the
indicator light is not on.
1. Mains power supply 1. Check mains power supply.
2. Unit is not switched on
2. Check that the unit is correctly
plugged in and turned on; ensure you
have read the manual for both for the
operations functions.
3. Dial Control or Timer
are faulty
3. Call service agent or qualified
technician.
4. Plug and lead are
damaged
4. Call service agent or qualified
technician.
5. Internal wiring fault
5. Call service agent or qualified
technician.
The unit is heating but the
indicator lights are not on. 1. The indicator light is
faulty
1. Call service agent or qualified
technician.
Slow heat up or no heat up,
power is on.
1. Incorrect operation
2. Warm Up
1. Ensure that you have clearly read the
manual, to understand the operating
functions.
2. Allow 5 minutes warm up period.
3. Elements are faulty
3. Call service agent or qualified
technician.
4. Power dial is faulty
4. Call service agent or qualified
technician.
Conveyor is not rotating
1. The unit is not on or
the function control is not
activated.
2. Speed Control Fault
3. Motor Fault
4. Gear/Chain Fault
1. Turn the unit on and adjust function
control to required setting.
2. Call service agent or qualified
technician.
3. Call service agent or qualified
technician.
4. Call service agent or qualified
technician.