Cub Cadet EX3200 - Manual (Page 70)

11-1
11. HYDRAULIC SYSTEM
Ex2900 / 3200 Operator's Manual
11. HYDRAULIC SYSTEM
ALWAYS fully release the internal
hydraulic pressure before
disconnecting a hydraulic line.
ALWAYS ensure that all
connections are tight and all the
hydraulic lines, pipes and hoses are free from wear
or damage.
IMPORTANT:
●NEVER operate the 3-point hitch control lever before the
engine has been sufficiently warmed up.
●If the 3-point hitch control lever is operated before the
engine has been warmed up, the hydraulic system can
be damaged or develop a failure.
●If abnormal noise occurs after the 3-point hitch has been
raised, then misadjustment or failure of the hydraulic
system should be suspected. Immediately stop
operation, and request your local Cub Cadet Yanmar
dealer to service or repair the tractor.
■ Operating the 3-Point Hitch Control Lever to Raise or Lower the 3-Point Hitch
1. Shift the 3-point hitch control lever to the intended
position.
2. Adjust the position stop knob to set the lowest position
of the implement to a given height.
(A) Position stop knob
(B) 3-point hitch control lever
NOTE:
●Moving the 3-point hitch control lever forward will cause
the implement to lower.
●Moving the 3-point hitch control lever backward will
cause the implement to raise higher.
WARNING
1. 3-Point Hitch Control System
3013703a
(A)
(B)