Dell B5460dn Mono Laser Printer User Manual
Page 17
Advertising
An optional memory card can be purchased separately and attached to the controller board.
1
Access the controller board.
For more information, see
“Accessing the controller board” on page 13
2
Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
1
2
4
Push the memory card straight into the connector, and then push the card toward the controller board wall until
it clicks into place.
5
Reattach the controller board shield, and then the controller board access cover.
Additional printer setup
17
Advertising