The system back panel. see figure 3-23 – Dell PowerEdge 2900 User Manual
Page 88
Advertising
88
Installing System Components
Figure 3-23.
Installing a RAC Card
5 Angle the RAC card so that its NIC connector inserts through the back-panel RAC card opening.
See Figure 3-23.
6 Attach the card to the expansion-bay bracket:
a
Position the RAC card on the expansion-bay bracket so that the plastic standoff at the back of the
bracket inserts into the notch on the edge of the RAC card.
b
Carefully press the back end of the card onto the two plastic standoffs until the clips on the
standoffs snap over the card edges. See Figure 3-23.
1
notch in card edge
2
back standoff
3
NIC connector cutout
4
RAC card
5
RAC connector 2
6
RAC connector 1
7
expansion-bay bracket
8
standoffs with card-edge clips
(2)
2
6
7
8
4
3
5
1
Advertising