Audio output connections, Antenna & tv connections – CyberHome Entertainment CH-DVR 1500 User Manual
Page 13
Audio Output Connections
CONNECTIONS
Receiver with Digital
Audio Input
COAXIAL DIGITAL AUDIO IN
This unit features a variety of audio line outputs for connection to a receiver or other audio equipment.
Use the included A/V cable to connect the stereo audio outputs for connection to a TV or stereo receiver.
Optical and Coaxial digital audio outputs send an encoded digital bitstream, suitable for receivers with Dolby or DTS decoding
capability. These outputs require special cables not included.
OPTICAL DIGITAL AUDIO IN
R
STEREO AUDIO IN
TV or receiver
with stereo
audio in
L
ON
OFF
I
O
AC IN
~100-230V
Antenna & TV Connections
TV with
coaxial
antenna or
cable TV
connection
ANTENNA OR CABLE TV CONNECTION
13
ANTENNA OR CABLE TV CONNECTION
TV with
coaxial
antenna or
cable TV
connection
IN
OUT
OUT
Splitter
OR
This unit is available with and without an antenna passthrough connection. For units with only an Antenna input connector, as shown
below to the right, use the included Splitter to connect a single RF input signal to the recorder and a TV.
With Passthrough Connector
Without Passthrough Connector