Changing switch information, Figure 32 – Dell POWEREDGE M1000E User Manual
Page 47
EZSwitchSetup Administrator’s Guide
37
53-1002744-01
Changing switch information
3
FIGURE 32
Port Information tab
The information page displays the following for each port:
•
Port number.
•
Port name.
•
State of the port.
•
Port type.
•
Status (health) of the port.
•
Indication of whether the port is licensed.
Changing switch information
From the Switch Manager, you can relaunch the EZSwitchSetup Switch Configuration to perform
the following tasks:
•
Change the switch name.
•
Change the switch time.
•
Change the admin password.
•
Change the zoning configuration type.
This is the same wizard that was launched the first time you set up the switch.
1. Click Setup under Switch in the task panel.
The Switch Configuration launches.
2. Follow the instructions in the wizard.
You can optionally change the switch name, switch time, and admin password. When
prompted, you must select a zoning configuration.