CyberData PoweredUSB Hub - Manual (Page 2)

PoweredUSB Hub
Display Scanner Printer Signature Capture Pad
PC Host
License note:
The PoweredUSB controller board contains specific technology covered by a patent held by IBM Corporation. CyberData has obtained a license from IBM that
permits CyberData Corporation, among other things, to make or sell products that incorporate this technology. The license also permits these products to be
resold by an entity after they have been initially sold by CyberData.
CyberData Corporation 2555 Garden Road Monterey, California 93940
(831) 373-2601 (831) 373-4193 www.cyberdata.net
CyberData Corporation
PoweredUSB Hub
Typical Installation
Host
Active
100-120/200-240VAC
60/50Hz
6/3A
C o r p o r a t i o n
Power
Port 3
+12V
Power
Port 2
+5V
Power
Port 1
+5V
Power
Port 4
+12V
Power
Port 5
+12V
Power
Port 6
+24V
CyberData
+24V Port
On/Off
Fan AC In
Host connect LED USB Host computer
Front View Side View
AC Cable
The AC connection is a standard IEC type.
Input Requirements:
Voltage: 90 ~120 VAC or 200 ~ 260 VAC Auto Switching
Frequency: 60/50 Hz
Input Current: 6.0A (RMS) for 115VAC or 3.0A (RMS) for 230VAC
Host Connector
The Host connector is a standard USB "A" to "B" type cable. Maximum length is 5 meters (16.5 feet).
PoweredUSB Cables
Part Number PoweredUSB Cable Description Application
010855 PoweredUSB Cable, 12V to 2x4 - 2.25 Meter PIN Pad / Signature Capture
010736 PoweredUSB Cable, 12V to 10 Pin RJ45 - Semi-Coiled - 15 Feet Hand Scanner
010735 PoweredUSB Cable, 12V to Din8 F - 3 Meter Customer Display
010617 PoweredUSB Cable, 24V to 1x8 - 1.2 Meter Printer
010632 PoweredUSB Cable, 24V to 3-Pin Power Connector - 4 Meter Printer
010714 PoweredUSB Cable, 24V to "Y" Cable - USB-B and 3-Pin Power - 1 Meter Printer
+12V Ports (3) +5V Ports (2)