Wireless network setup, Access point via usb cable in windows – Dell B1265dfw Multifunction Mono Laser Printer User Manual

Page 159

Advertising
background image

Wireless network setup

159

2. Using a Network-Connected Machine

Access point via USB cable in Windows

Items to prepare

-

Access point

-

Network-connected computer

-

Software CD that was provided with your machine

-

The machine installed with a wireless network interface

-

USB cable

1

Check whether the USB cable is connected to the machine.

2

Turn on your computer, access point, and machine.

If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.

3

Insert the supplied software CD into your CD/DVD drive.

The software CD should automatically run and an installation window
will appear.

If the installation window does not appear, click Start > All programs >
Accessories > Run.

X:\Setup.exe replacing “X” with the letter, which represents your CD/
DVD drive and click OK.

For Windows 8,

If the installation window does not appear, from Charms, select
Search > Apps and search for Run. Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD/DVD drive and click OK.

If “Tap to choose what happens with this disc.” pop-up window
appears, click the window and select Run Setup.exe.

Advertising