Chief Manufacturing Vibration Mount CMA-347 User Manual
Vibration mount model cma-347
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8803-000044 (Rev. D)
2007 Chief Manufacturing
09/07
BEFORE YOU BEGIN
Vibration Mount
Model CMA-347
The Chief CMA-347 Vibration Mount is designed to
dampen shock and vibration between a mounted item
and its structural mounting surface.
Any lengths of standard NPT 1 1/2” pipe, threaded on
both ends, can be used to extend the height capabilities
to meet your needs.
CAUTION: To prevent damage to the mount, which could void factory warranty and affect the attached equipment,
thoroughly study all instructions and illustrations before you begin the installation. Pay particular attention to the
“Important Warnings and Precautions” on Page 1.
•
The maximum weight to be installed on the CMA-347 mount is 35 pounds (15.88 Kg).
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.