Dell PowerVault TL4000 - Manual (Page 19)

Bit 7 6 5 4 3 2 1 0
Byte
5 SCCS ACC TPGS 3PC Reserved Protect
6 BQue EncServ Reserved MultiP MChngr Obsolete Obsolete Addr16
7 Obsolete Obsolete WBus16 Sync Linked Obsolete CmdQue Reserved
8 -
15
Vendor Identification (8 ASCII bytes)
16 -
31
Product Identification (16 ASCII bytes)
32 -
35
Product Revision level (4 ASCII bytes)
36 -
37
Plant of manufacturer
38 -
49
Serial Number (12 ASCII bytes)
50 -
54
Reserved
55 Reserved BarC
56 Clocking QAS IUS
57 Reserved
58 -
59
Version Descriptor: 005Ch (SAM-2 ANSI INCITS 366-2003)
60 -
61
Version Descriptor: 0B56h (SPI-4 ANSI INCITS 362-2002)
62 -
63
Version Descriptor: 02FEh (SMC-2 ANSI INCITS 382-2004)
64 -
65
Version Descriptor: 030Fh (SPC-3 T10/1416-D revision 22)
66 -
73
Reserved
Field descriptions:
Peripheral Qualifier:
A return value of 0 indicates that the specified LUN is supported in this device. When a
unsupported LUN was specified the Peripheral Qualifier will return 3h which indicates that
specified LUN is not supported.
Peripheral Device Type:
Indicates that this is a medium changer device. Set to 8. When a unsupported LUN was specified
the Peripheral Device Type will return 1Fh which indicates that specified LUN is not supported.
RMB: Removable Medium Bit. Set to 1.
Version:
The library complies to SPC-3. Set to 5.
NormACA:
A NORMACA bit set to zero indicates that the device server does not support a NACA bit set to
one in the control byte and does not support the ACA task attribute.
Chapter 3. Supported SCSI Commands 3-5