Dell B1163 Multifunction Mono Laser Printer - Manual (Page 43)

43 2. Basic Setup
Basic scanning
For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 148).
15
Basic Scanning
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 34).
2 Press Scan to on the control panerl.
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Dell Printer Manager > Switch to
advanced mode > Scan to PC Settings.
3 Select the scan destination you want and press OK.
Default setting is My Documents.
• You can create and save the frequently used settings as a profile list. Also
you can add and delete the profile and save each profile to a different
path.
• To manage profiles in Dell Printer Manager > Switch to advanced
mode > Scan to PC Settings .
4 Select the option you want and press Save.
5 Scanning begins.
Scanned image is saved in computer’s C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.