Dell PowerVault DR6000 - Manual (Page 12)

Item How is this memory write
protected? How is the memory cleared?
ONFI Backup Flash Not WP. Not visible to Host
Processor Flash can be cleared by powering up the card and
allowing the controller to flush the contents to
VDs. If the VDs are no longer available, cache can
be cleared by going into controller bios and
selecting Discard Preserved Cache.
SDRAM Not WP. Not visible to Host
Processor Cache can be cleared by powering off the card
NVRAM (WAM 2) Card
DDR3 SODIMM Not WP NVRAM Init program
NAND Flash Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
Boot Flash (NOR) Not WP.
Cannot be cleared with existing tools available to
the customer
EEPROM Not currently used Not currently used
Monet Serial Flash Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
Monet DDR Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
NVSRAM Flash Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
NVRAM (WAM 1) Card
DDR2 RDIMM Not WP NVRAM Init program
NAND Flash Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
Boot Flash (NOR) Not WP
Cannot be cleared with existing tools available to
the customer
EEPROM Not currently used Not currently used
Van Gogh Serial Flash Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
Van Gogh DDR2 Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
NVSRAM Flash Not WP. Not visible to Host
Processor Cannot be cleared with existing tools available to
the customer
NOTE: For any information that you may need, direct your questions to your Dell Marketing contact.
© 2014 Dell Inc.
Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.