Ipmi shell global options – Dell PowerEdge 7250 User Manual
Page 35
BMC Management Utility
33
IPMI Shell Global Options
IPMI Shell has the following global options:
IPMI Session Option -ip
Synopsis
ipmish -ip bmc_ip_address | bmc_hostname -u username -p password
Description
This option is used to establish a connection to a remote managed system using the LAN channel.
The IP port specified in installation (default value is 623) is used unless another port has been
configured.
Options
NOTE:
The following options cannot be used independently. One or more IPMISH command must follow
the option.
-ip bmc_ip_address | bmc_hostname
Specifies the IP address or hostname of the remote managed system.
-u username
Specifies the BMC username used to connect to the system.
-p password
Specifies the BMC user password used to connect to the system.
IPMI Session Option -com
Synopsis
ipmish -com serial_port -baud baud_rate -flow flow_control
-u username -p password
Description
This option is used to establish a connection to a remote managed system using the serial channel.