Dell Vostro 460 (Late 2010) - Manual (Page 74)

Back to Contents Page
Installing Front I/O Panel
1. Route the front I/O panel cables through the bays and holes.
2. Install the two screws that secure the front I/O panel to the computer.
3. Thread the cables through the routing clips if present and then connect the three front I/O cables
to the system board.
4. Install the video card .
5. Install the video card holder .
6. Install the front bezel .
7. Replace the computer cover ().
8. Follow the procedures in After Working Inside Your Computer .
Related tasks
Installing Front I/O Panel