Dell PERC 4/im User Manual
Page 6
Floppy 1.2 Mbyte emulation disk
Floppy 1.44 Mbyte emulation disk
Floppy 2.88 Mbyte emulation disk
Hard disk emulation
The type of emulation assigns the drive letter for the CD-ROM. For example, if a 1.44 Mbyte floppy emulation CD
was loaded, then the CDROM drive would become the designated A: drive, and the existing floppy would become
drive B:.
Using the Fusion-MPT SCSI BIOS Configuration Utility
The SCSI BIOS allows you to change the default configuration of your host adapters by using the embedded BIOS
Configuration Utility.
When the BIOS loads, the following message will appear on your monitor:
"Press Ctrl-M to start LSI Logic Configuration Utility..."
This message remains on your screen for about five seconds, giving you time to start the utility. After you press Ctrl-
M, the message changes to:
"Please wait, invoking LSI Logic Configuration Utility..."
After a brief pause, your computer monitor displays the Main menu of the SCSI BIOS Configuration Utility.
NOTE: Not all devices detected by the Configuration Utility can be controlled by this SCSI BIOS.
Devices such as tape drives and scanners require that a device driver specific to that peripheral be
loaded. However, the SCSI BIOS Configuration Utility does allow parameters to be modified for these
devices.
User Inputs
You make configuration changes in the main area of the menu. This area is lighter in color than the header or footer
areas as displayed on line in the Configuration Utility’s menu. Table 2-1. lists the various keyboard options you use to
make changes. Settings with gray or yellow text can be changed, settings with white text cannot. This is true
regardless of the Color/Mono setting chosen.
Table 2-1. Keyboard Options
Keyboard
Option
Description
F1 = Help
Provides context sensitive help for the cursor resident field.
F2 = menu
Sets cursor context to the menu area. Select a menu item and press Enter. This option is only
available from the Main menu.
Arrow
Keys =
Select
Moves the cursor up, down, left, or right.