Dell 1710/n Mono Laser Printer - Manual (Page 49)

Secondary error code light sequences for jams
Continue Ready/Data Toner
Low/
Replace
Drum
Load
Paper Paper
Jam Error Printer condition Click here for
more
information
Paper jam at input
sensor* Clearing paper
jams
Paper jam in the
manual feeder Clearing paper
jams
Paper jams as it
exits the tray into
the printer Clearing paper
jams
Paper jams as a
printed job exits
the printer Clearing paper
jams
Paper jam in Tray 1 Clearing paper
jams
Paper jam in Tray 2 Clearing paper
jams
* Paper jams at the input sensor can be either after the paper leaves the tray and enters the printer or in
the manual feeder.
What this light sequence means:
The printer is ready to receive and process data.
The printer is in Power Saver mode.
What you can do:
Send a print job.
Press Continue to print the menu settings pages for a list of current
printer settings.
Press and hold Cancel to reset the printer.
NOTE: If you want to change the Power Saver setting, it can only be set from
the Local Printer Settings Utility (see Dell Local Printer Settings Utility ).