Capresso Coffeemaker - Manual

Impressa S Avantgarde Quick Reference Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
RED TEXT represents display text.
A) First Time Ever Preparation
1. Fill water in tank and beans in bean container.
2. DO NOT install the Clearyl Filter Cartridge now!
3. Push the main power switch in the back of the machine.
4. Push the ON/OFF button in the display. When the display
reads FILL SYSTEM / PRESS STEAM place a cup under
the frother and push the PERMANENT STEAM button.
SYSTEM FILLING then HEATING UP .
5. PRESS RINSE . Place a cup under the coffee spouts and
press the RINSE button. MACHINE RINSING. SELECT
PRODUCT .
6. Place a large cup underneath the coffee spouts and press
the 1-CUP coffee button. 1 COFFEE : The machine
starts grinding and brewing. Repeat once. Discard the first
two cups of coffee.
B) Daily Preparation
1. Fill fresh water in tank and check bean container.
2. Push ON/OFF button.
HEATING UP. PRESS RINSE . Place
a cup under the coffee spouts and press the RINSE button.
MACHINE RINSING. SELECT PRODUCT .
Important: You can only brew coffee when display shows
SELECT PRODUCT
C) Grinding and Brewing Coffee
Four pre-set coffee buttons:
1 ESPRESSO , 2 ESPRESSI ,
1 COFFEE , 2 COFFEES . These buttons are pre-set for
strength (five settings), cup size (1 to 8 oz. per cup) and
temperature (HIGH, NORMAL) During brewing you can over-
ride the cup size by turning the ROTARY DIAL. Cup size for
2-cup buttons is shown PER CUP! In programming you can
change all three functions.
Important: You can always stop the flow of coffee by pushing
any of the coffee buttons.
Selector Switch
SELECT
PRODUCT
Steam
Portion
Permanent
Steam
ON/OFF Rinse
SELECT
PRODUCT
Four Coffee Buttons
A LA Carte
Rotary Dial
with
Push-Button