Removing the computer cover – Dell Dimension 9200c User Manual
Page 33
Removing the Computer Cover: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/cvrop.htm[10/31/2012 8:07:32 AM]
Removing the Computer Cover
Dell™ Dimension™ 9200C Service Manual
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate any static electricity that could harm internal components.
NOTICE:
Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desktop space.
NOTICE:
Ensure that you are working on a level, protected surface to avoid scratching either the computer or the
surface on which it is resting.
2. Lay your computer on its side with the computer cover facing up.
3. Pull back the cover release latch on the top panel.
1
computer cover
2
cover release latch
3
security cable slot
4. Locate the three hinge tabs on the bottom edge of the computer.