Setting up your network – Dell KVM 1081AD/ KVM 2161AD User Manual
Page 20
12
xxx
|
Installation
xxx
•
User Documentation CD
•
Server Console Switch Quick Installation Guide
•
Dell Rack Mounting Quick Installation Guide
•
Dell Safety Sheet
•
Dell RTF Regulatory Technical Bulletin
Additional items needed:
•
One Dell SIP or Avocent IQ module per attached device
•
One CAT 5 Patch Cable (up to 30 meters) per attached device
Optional Items:
•
Dell Remote Access Key (RAK)
•
Port Expansion Module (PEM)
NOTE: You cannot open a virtual media session or a CAC session if the device is
connected via a PEM.
Setting Up Your Network
The SCS uses IP addresses to uniquely identify the SCS and attached devices.
The SCS supports both Dynamic Host Configuration Protocol (DHCP) and
static IP addressing. Make sure that an IP address is reserved for each SCS and
that each IP address remains static while the SCS is connected to the network.
Keyboards
A USB keyboard and mouse can be connected to the analog ports of the SCS.
NOTE: The SCS also supports the use of multiple keyboards and multiple mice on the
analog port. The use of more than one input device simultaneously, however, may
produce unpredictable results.